Seeds cold room is a kind of cold storage that is rare in quantity but essential to agricultural development. Seeds need stable storage to keep strong germination rates. Farmers and seed firms use seeds cold rooms to protect seed life. A small cold room for 2–5 tons of seeds often uses 12–20 m² of space. Larger units for 20–30 tons need around 80–120 m².
Seeds lose strength fast when they face heat above 28°C. Moisture above 65% also damages many seed types. The seeds cold room controls both factors. Many rooms hold temperature at 5–15°C and keep humidity near 40–55%. These levels support long storage life. Temperature changes stay within ±1°C. Humidity changes stay within ±5%. A seeds cold room gives clean air, low moisture, and steady cooling. The following parts discuss features, differences, design points, and production points.
Features
The seeds cold room focuses on stable cooling and humidity. Seeds lose quality fast when heat rises. Many seeds keep good germination for 8–18 months when they stay in controlled rooms. The cold room runs at 5–15°C. Airflow stays steady at 0.3–0.5 m/s. This airflow keeps temperature even across shelves.
Humidity control plays a key role. Many seeds need 40–55% humidity for safe storage. The cold room uses dehumidifiers with power levels of 1–2 kW. These units pull 4–8 liters of moisture per hour. The room also uses insulated PU or PIR panels. These panels have thickness levels of 75–100 mm. A 100 mm PIR panel offers 0.022 W/m·K conductivity. This level reduces cooling loss by 30–35%.
Lighting inside stays soft. LED lights use 5–12 W per unit. The cold room also has clean shelves with load levels of 120–200 kg per layer. Most seeds need slow airflow during long storage. The room includes fans with 1,000–2,500 m³/h capacity. The system controls airflow without shaking the seeds.
The cold room also keeps clean air. Many rooms use filters of G4–F7 grade. These filters catch dust and keep storage safe. Good insulation, clean air, and stable climate create the main features of the seeds cold room.
Special cold room
Seeds cold rooms differ from fruit, meat, and flower cold rooms. Each product needs different temperature and humidity levels. A fruit cold room often works at 1–10°C with 80–95% humidity. This high humidity keeps fruit fresh. Flower cold rooms use 2–8°C and 85–95% humidity.
Seeds need lower humidity than these cold rooms. Seeds absorb moisture fast. High humidity above 60% can cut germination by 15–30% in two months. Seeds also need slow airflow because strong wind dries them too fast. Other cold rooms often use 1–2 m/s airflow. Seeds rooms use only 0.3–0.5 m/s.
Seeds also need strong temperature stability. Many other cold rooms accept ±2–3°C changes. Seeds storage often needs ±1°C control. Temperature shocks weaken seed life. Testing groups show germination drop by 8–15% when swings exceed 3°C.
Other cold rooms store heavy goods. Seeds cold rooms store light goods. A seeds room uses shelf weights of 120–200 kg per layer. A meat cold room uses pallet racks with 800–1200 kg per layer. Seeds storage also avoids wet floors. Many seeds rooms use raised platforms that stand 5–10 cm above floor level.
Design Points
Good design keeps seeds safe for long periods. Designers first choose room size. A 10–15 m² room stores 2–5 tons. A 100 m² room stores 20–30 tons. Designers also set door width at 0.9–1.2 m for smooth movement.
Temperature control needs strong planning. The room uses compressors with 1.5–5 kW capacity. The system keeps temperature at 5–15°C. Sensors read values every 30–60 seconds. The control panel adjusts cooling in small steps. The room also needs one humidity sensor for every 20–25 m².
Insulation plays a large role. Most rooms use 75–100 mm PU or PIR panels. These panels cut heat gain by 35–45%. This lowers power use. Doors also include heater wires of 15–25 W/m to stop condensation.
The room plan includes airflow lines. A good layout keeps airflow at 0.3–0.5 m/s. Vent openings stay around 2–4% of room area. Fans push 1,000–2,500 m³/h. The layout avoids dead corners. This helps seeds stay at even temperature.
Lighting also influences quality. LED lamps create 50–100 lux. Power levels stay low. Sensors turn lights off when the room closes. The room needs a small drain line with 2–3% slope. Designers put shelves at 40–60 cm from walls. This space improves airflow.
Good design gives stable climate, low power use, and long seed life.
Production and Construction Points
The pre-fabricated panels must achieve high dimensional accuracy. Tight tolerances prevent air and moisture infiltration. Manufacturers use injected polyurethane foam insulation. This ensures a consistent density throughout the panel. Panel joints use unique locking mechanisms. These seals must remain airtight under stress.
Refrigeration components require careful integration. Technicians must use specialized lubricants and refrigerants. These must perform reliably at very low temperatures. Proper pipe insulation is absolutely mandatory. Any breach causes inefficiency and condensation risk.
Installation protocols are rigorous. Crews must seal every penetration carefully. This includes pipes, electrical conduits, and door frames. Builders use specialized low-temperature sealants. The foundation slab must be insulated underneath. This prevents permafrost formation below the room. Permafrost can heave the floor and damage the structure.
Commissioning involves extensive testing. Technicians measure temperature uniformity across the room. They verify the dehumidifier’s performance meticulously. The system must achieve target RH quickly. Data logging confirms stable operation over days. Only after successful testing does the room receive seeds. Quality control guarantees the longevity of the storage environment.
A seeds cold room protects seed quality with stable temperature and low humidity. The system supports long storage life and keeps germination strong. Clear differences separate seeds rooms from fruit, meat, and flower rooms. Stable airflow, low vibration, and tight temperature control keep seed biology safe.
Post time: Dec-03-2025